Today I'd like to show you how to use the patterns that we've been working on to make a muslin for fitting. I know this might sound dumb, but a Muslin (capital to help explain) is not necessarily made out of muslin (the type of fabric). A Muslin is just another way of saying a mock-up or test, and is made out of a cheap version of whatever type of fabric you are using to help give you an idea of how the final garment will fit.
For example, if we were making a pattern for a t-shirt our Muslin would be made out of a knit fabric with a weight/hand similar to our "good" fabric. If we were making a silk blouse, we wouldn't use a quilting fabric for the test because they wouldn't drape the same way. We'd use a cheap silk or silk-like fabric. Does that make sense?
There are ways to make pattern pieces directly from a person's body (or mannequin), but that technique is called draping, (original huh?) and is next to impossible to accomplish using an real kid. (They would be three sizes larger by the time you were done from all the M&Ms you would have to use to bribe them! ; )
For what I'm showing you today I really am using muslin, and these 3 patterns (front, back, sleeve) to see if the 3T patterns I've been working on will fit my 2T-ish kid.
|I can already tell at this point that I don't like the collar and will be changing that a little on the pattern.|
Next I cut out 2 back pieces (left and right) with the same shoulder, side, and one armhole SA. I also added an inch to either side of the the center line so that I would have somewhere to pin the shirt together once it was on Reli. (Don't forget to mark the original Center Back line, or pinning will be a pain later!)
|The letter F designates the front of the sleeve so I put it in the correct armhole.|
Once you have all your SA added and your pieces cut out you are ready to sew it together!
(Don't forget to press every seam! It really does make a difference.)
-Lay the front face up and place the 2 back pieces on top face down (one left, one right). Match up the side and shoulder seams and pin the front piece to the back piece. You should have 4 seams ready to sew. (left side, left shoulder, right side, and right shoulder) When those are sewn you will have something that looks like a backwards vest.
-The opening between the 2 back pieces (where I added the 1" SA above) will NOT be sewn together!
-Next, use your longest stitch to baste along the curve of the sleeve. (Start about 1 1/2" from the underarm seam not at the edge.)
-With right sides together, sew the straight sides of the sleeve together to form a tube.
- Pull the baste thread at the sleeve curve until your tube is small enough to match with your armhole. Don't forget to match up the side seam with the underarm seam. Pin Sleeve to Armhole right sides together.
- Sew the sleeve in place and remove the baste stitch.
- For darts, Fold the "triangle" right sides together until the sides are one on top of the other. Then starting at the bottom, stitch up the angled line and right off the fabric at the top point. (If it makes more sense, I pinch the left pink line to touch the right pink line, and then sew both lines together.)
Below I tried to show the difference in fit between the shirt with and without the darts.
I know most of you are interested in sewing without any darts, and I'll be showing you how to
modify your pattern to "dartless" soon. That will help make patterns for knit projects much easier.
(golly could she be happier?)
(a bit too long)
You can see the definite change with darts here.
Here you can see how I pinned the 2 center lines together with safety pins.
For this one I cut the extra 2 inches off the sleeves, and also took in both side seams.
(I guess we aren't 3T just yet.)
If you plan to make modifications like in the pictures directly above, put the shirt on your kid inside out. It makes it much easier to pin the seams or darts smaller a little at a time until you get it just right. Then you can draw where you want the new seams to go directly on the muslin, take out the pins, pull out the seams, and trace the new lines on the fabric onto your old paper pattern pieces with a tracing wheel.
|This is not the same bodice, just an example.|
When everything fits the way you like it, you might want to trace your final pattern onto something stiff like poster board so that it doesn't get distorted later. I like to use a cereal box for this part. Just make sure to label the pattern pieces with front, back, the size, and whether or not you have added seam allowance. Then you won't be scrambling later when you forget like I do.
I hope this helps, but if you have any questions please let me know.
Thanks for visiting and have a great weekend!